Accessories - AntiLaser Systems

Accessories for AntiLaser Priority

Extra ALP RX Sensor


RX Sensors receive and transmit
Each RX Sensor contains receive and transmit diodes. Add an extra Sensor to the front or rear of a large vehicle. A cable extension is usually required for a rear sensor.

Price: $ 745.00 AUD

ALP TX Sensor (BLACK)


IMPORTANT TX sensors only transmit

TX sensor features a 3-diode horizontal array with sequential transmission: faster pulsing / higher power without overheating. Installed on F2 (front) and/or R2 (rear) ports in the Control Box. Must be combined with at least 1 x RX Sensor.

Price: $ 845.00 AUD

ALP T-Splitter (2 Sensors share 1 Cable)


Install 3 Sensors (2 x RX and 1 x TX) on the rear of a vehicle with only 2 cables. TX Sensor must be on R2 with 2 x RX Sensors through the Splitter to R1 using a single cable.

Price: $ 95.00 AUD

Cable Extension for ALP Sensor


Provides extra cable-length for a rear Sensor.

Price: $ 65.00 AUD

GPS Antenna for ALP

This amplified antenna connects to the AntiLaser Priority Control Box.
It's required to enable the speed-related functions in the ALP Laser setup menus. Responses to Laser Speed Guns can be turned off below 40 kph with alerts still occurring. Other speeds thresholds are 30, 50, 60, 70, 80, 90.


Price: $ 155.00 AUD

Radar / GPS Module for ALP

Connects a 3rd party Radar Antenna (with ALP Firmware)
to an ALP Control Box (Interface).


Price: $ 265.00 AUD

Bluetooth Module for ALP - Gen3

AL Priority Bluetooth Module connects to the ALP Control Box.
The Control Panel is bypassed. Alerts (audible/visual) are by
Bluetooth link to an Android Smartphone or iPhone.

If the bluetooth connection fails, alerts divert to the Control Panel:
-	Standard ControlSet: Beeps
-	HiFi ControlSet: Siren alert > Voice LIDAR type > Direction


Price: $ 265.00 AUD

Laser Tester for ALP

AL LaserTester simulates the pulse rates of six (6) different Laser Speed-Guns including the variable-pulse LTI TruSpeed. Bottom button changes the Laser type and the top button is to FIRE the pulses that will trigger an alert (and transmission) from AntiLaser Priority.

IMPORTANT: Do not look at ALP Laser sensors when they are transmitting.


Price: $ 79.00 AUD

AntiLaser Priority Control Unit
(HW6 version)
(Accessories included)

Replacement for older Hardware versions (ALP Brain) that cannot be upgraded to the latest Firmware. Package includes everything in the ALP Hi-Fi Audio kit minus the Speaker. Your existing installed speaker is compatible with this AntiLaser Priority Control Box.

Control Unit includes:

Control Box
Control Set
Power cable
LED cable
USB Extension Cable (3m)
Installation Accessories
ALP User Guide


Price: $ 845.00 AUD

AntiLaser HI-Fi Audio Control Set
(Upgrade from "beeper" version)
(HW6 version)
(Accessories included)

With older (beep-alert) AntiLaser Priority versions:
Replaces the standard Control Box and Control Panel.

Enables louder alerts for Laser encounters from a HIFi speaker:
-	The initial "attention-getting" alert is a siren.
-	Spoken description for front or rear Laser detection and Laser type.
-	Menu options selected with the Control Panel buttons are spoken.

Hi-Fi AUDIO (upgrade) includes:

Control Box
Control Set
External Speaker
Power cable
LED cable
USB Extension Cable (3m)
Installation Accessories
ALP User Guide


Price: $ 945.00 AUD

Email - mail@speedsafe.net.au